Anker Soundcore AeroFit – White

About this item

• Unmatched Comfort: AeroFit open-ear headphones utilize a lightweight, and compact design optimized for small ears allowing you to enjoy breathable listening. AeroFit gradually conforms to your ears, offering greater comfort the more you wear them.
• Enhanced Awareness: Remain aware of your surroundings, such as public transit announcements, and oncoming cars. Stay in touch with the world around you thanks to AeroFit open-ear headphones.
• Balanced and Clear Sound: AeroFit’s drivers feature composite diaphragms with titanium-coated domes so you can enjoy well-balanced sound with symphonic mids, an expansive soundstage, and crystal-clear highs.
• Crisp Calls with 4 Mics and AI: AeroFit open-ear headphones feature 4 mics and an AI Noise Reduction Algorithm to offer pristine call quality for everyday conversations.
• IPX7 Waterproof with Sweat Guard: AeroFit leads in waterproof and sweatproof performance. Using soundcore’s exclusive Sweat Guard tech, nano-coating, and a unique chamber design, it provides total protection for critical components.
• Ultra-lightweight open-ear comfort.
• Ultra-soft materials with a gentle finish.
• Snug and secure fit with flexible ear hooks.
• Well-balanced audio with titanium-coated domes.
• 4 mics and an AI algorithm for crisp, clear calls.
• IPX7 waterproof with Sweat Guard™️ technology.
• TCO Certified: For Better Sustainability.
• What Bluetooth version does soundcore Aerofit support?
  Bluetooth V5.3
• What audio codecs does soundcore Aerofit support?
  SBC and AAC
• How many Bluetooth devices can the headphones record?
  Up to 8 Bluetooth devices at one time.
• What is the Bluetooth range?
  10m/33ft
• What is the waterproof grade of these headphones?
  Headphones: IPX7 Charging case: Non-waterproof Note: – Do not place the earbuds and the charging case into a washing machine. – Make sure that the earbuds and the charging case are dry before charging.
• Does the charging case support wireless charging?
  The charging case does not support wireless charging.
• Do the earbuds support fast charging?
  The earbuds support fast charging, with 10 minutes of charging providing around 4 hours of battery life. The charging case does not support fast charging.
• Does the product have a wearing detection feature?
  This product does not have a wearing detection feature.
• What is the maximum latency of the earbuds?
  Around 200ms
• What is the maximum sound pressure of the earbuds?
  The maximum sound pressure is 88db.
• What is the battery capacity of the earbuds and how long does it take to charge them?
  85mAh for each of the left and right earbuds, about 1 hour for a full charge.
• What is the battery capacity of the charging case and how long does it take to charge?
  750mAh, about 2 hours for a full charge.
• How many times can I charge the earbuds with a full charge of the charging case?
  The earbuds can be fully recharged a total of 2.8 times with a full-power charging case.
• How long is the battery life of the earbuds, and how long does the charging case last?
  At 50% volume, the earbuds can last for about 11 hours when listening to music. With the charging case, the total battery life is around 42 hours.
• How long is the battery life of the earbuds during calls?
  The earbuds can last for about 8.5 hours during calls.
• What are the required specifications for charging the charging case?
  A charger and charging cable with 5V/1A or above are required.
• Do the earbuds provide a voice prompt for power on and low battery?
  The earbuds will give a low battery voice prompt when the battery level is at approximately 10%, and this will occur every 15 minutes.
• Are the earbuds suitable for use while diving or swimming?
  No
• How to enter the multi-point pairing mode?
  Go to the settings in the top right corner of the soundcore app, select ‘Dual Connections’, enable the function, and finally select ‘Connect New Device’.
• What should I do if there is no sound after switching devices in multi-point pairing mode?
  1. Ensure that one of the devices has paused music playback and is not occupying the audio channel.
  2. Some devices may have compatibility issues, and switching devices can take around 20 seconds.
• How do I reset the earbuds?
  – Delete the pairing history from your Bluetooth device first. – Place the earbuds in the charging case and leave the case open. Press and hold the reset button on the charging case for 10 seconds until the LED indicators on the charging case start to scroll and then stay on for 5 seconds. At this time, your earbuds have been successfully reset. When resetting the earbuds, make sure the earbuds are properly connected to the charging case, or it may cause the reset to fail. When you place the left and right earbuds in the charging case, there will be white LED indicators in the charging case which confirms the earbuds are properly connected. If the indicators in the charging case don’t light up, please check whether the charging case and earbuds are properly connected, have enough power, and clean the charging pins with a dry cloth.
• How do I force the earbuds to pair?
  – Place both earbuds back into the charging case, with the case lid open. – Press and hold the charging case button for 3 seconds. The charging case indicator light will start to scroll, and the earbuds will disconnect from the current connection and enter pairing mode. – Turn on Bluetooth on your device and then pair it with soundcore Aerofit.
• How do I turn off the earbuds?
  1. When the earbuds are placed back into the charging case and the lid is closed, they will automatically power off and the Bluetooth connection will be disconnected.
  2. If the earbuds are not connected to Bluetooth, they will automatically power off after 30 minutes. (The automatic power-off time can be customized in the soundcore app).
• Can I just use a single earbud?
  Yes, you can use a single earbud. However, you cannot perform operations such as pairing, resetting, or customizing the EQ in mono mode.
• How do I adjust the volume via the earbuds?
  The volume adjustment function is disabled by default, but you can enable via the soundcore app and customize the touch controls.
• How do I pair the left and right earbuds with different devices respectively?
  The left and right earbuds do not support pairing with different devices.
• What should I do if the product becomes hot while charging?
  – Stop charging and check if there is any moisture or sweat in the charging port of the charging case. – Try cleaning the charging port before attempting to charge again.
  What should I do if there is no sound coming from the earbuds during a call, but it is heard through the phone after the headphones are paired or reconnected with the phone?
  Please select “soundcore Aerofit” as the output for calls on your phone.
• How do I maintain and care for the earbuds?
  1. Do not leave the earbuds unused for a long time. It is recommended to use them at least once a month. The battery life can be significantly affected if the earbuds are left completely discharged. 2. Try not to use the earbuds until the remaining battery is only 20% or until it shuts down due to low battery before charging. This can also greatly impact the battery life.
  3. The charging case should not be left in a low battery state for a long period of time. Please regularly charge the case.
  4. Clean the charging contact pins promptly after use.
  5. Store the earbuds on a dry desktop. If they accidentally come into contact with liquid, dry them with a hairdryer on the cool setting.
• What should I do if one side of the earbuds is malfunctioning, either by not powering on or failing to pair?
  – Remove the protective film covering the charging pins on the earbuds. – Ensure that the earbuds are fully charged and powered on. – Reset the earbuds per the following steps: Place the earbuds in the charging case and leave the case open. Press and hold the reset button on the charging case for 10 seconds until the LED indicators on the charging case start to scroll and then stay on for 5 seconds. At this time, your earbuds have been successfully reset. – Try these earbuds with another device.
• How do I turn off the touch prompt tone?
  You can turn on/off the prompt tone in the “More Settings” page of the soundcore app.
  How do I lock the touch control function with one click? (both function and prompt tone are locked with one click)
  You can go to the Controls interface in the soundcore app, select the Settings icon in the upper right corner, and then turn on/off the Control Lock. Please note that after enabling the Control Lock function, the touch controls and touch prompt tone of the earbuds will be temporarily disabled.
• What should I do if one earbud is silent but touch-responsive?
  1. Place both earbuds into the charging case at the same time and close the lid, then open it again to reconnect.
  2. If this doesn’t work, please reset them as per the following steps: – Place the earbuds in the charging case and leave the case open. – Press and hold the reset button on the charging case for 10 seconds until the LED indicators on the charging case start to scroll and then stay on for 5 seconds. At this time, your earbuds have been successfully reset.
• What should I do if the touch controls are easily triggered accidentally?
  1. Try to clean the touch area to avoid accidental touches caused by sweat accumulation.
  2. Disable the Single Press option in the control settings of the soundcore app.
• What should I do if the touch controls on the earbuds are not working or not responsive?
  1. Confirm if you have correctly touched the effective area of the control.
  2. Check if the touch control function has been turned off in the control device of the app. If this function has been turned off, try to turn on the button function and confirm again.
  3. If the above troubleshooting is not successful, please try to reset the earbuds by following these steps: – Delete the pairing history from your Bluetooth device first. – Place the earbuds in the charging case and leave the case open. Press and hold the reset button on the charging case for 10 seconds until the LED indicators on the charging case start to scroll and then stay on for 5 seconds. At this time, your earbuds have been successfully reset.
• What should I do if earbuds are uncomfortable to wear?
  1. Try adjusting the fit of the earbuds to achieve the best wearing position.
  2. Try slightly expanding the titanium wire to reduce any pressure they may be causing.
• What should I do if the earbuds do not fit securely?
  Try adjusting the fit of the earbuds to achieve the best wearing position.
• How do I pair the earbuds with the soundcore app?
  1. Download and upgrade the soundcore app to V3.39 or above. If you already have the app, it is recommended to uninstall it and then download it again. Overwriting installation is not recommended.
  2. Pair your earbuds with your phone. Currently, the soundcore app does not support computers.
  3. Open the app and select “Add Device”. The app will automatically connect to the earbuds. The first time you enter the app; you must agree to enable location permissions.
  4. If the connection fails, click “Set Up Manually” > “AeroFit” > “soundcore Aerofit” on the page to check whether it can be added manually. If you can’t find the corresponding model on this page, you can take a screenshot.
  5. For iOS phones, go into the region of the system, switch to United States, while for Andriod phones, switch the system language to English (United States).
  6. If it still fails, please uninstall and reinstall the app and log in again.
• What should I do if one side of the headphones is not producing sound?
  1. Use a Q-tip with a bit of rubbing alcohol or a small, clean brush to gently clean the metal mesh filter.
  2. Put both earbuds into the charging case at the same time, close the cover, and then open it to reconnect.
  3. If it still doesn’t work, please delete the pairing history from your Bluetooth device and then reset them per the following tips: Place the earbuds in the charging case and leave the case open. Press and hold the reset button on the charging case for 10 seconds until the LED indicators on the charging case start to scroll and then stay on for 5 seconds. At this time, your earbuds have been successfully reset.
  4. Try them with another device to see if the problem persists.
• What should I do if the volume of the earbuds is low when listening to music outdoors?
  These earbuds do not have a noise reduction feature, allowing users to better perceive their surroundings. However, this design is affected by environmental noise, and when the environmental noise is too loud, it will affect the sound effect of the earbuds. Therefore, please avoid using them in outdoor scenarios where the noise level is high.
• What should I do if the sound is low when the earbuds are connected to the PC?
  1. Confirm whether the audio channel is set to Stereo mode when listening to music or watching videos on the PC.
  2. Check if the volume of the player has been adjusted to the maximum level. (The volume of the player and the system volume need to be adjusted separately.)
• What should I do if the volume of the earbuds is low?
  1. Use a Q-tip with a bit of rubbing alcohol or a small, clean brush to gently clean the metal mesh filter under the rubber ear tips. This is best done when sound is playing through your earbuds at max volume.
  2. If possible, please try to use a bulb blower to clean the earbuds – air will be pushed into the port/filter and any dust/dirt inside the earbuds can loosen and extract debris, then use a cotton swab or toothpick to remove them.
  3. If using an Android phone, check if the volume sync setting is turned on in the Bluetooth settings.
  4. Turn the volume down one notch on your phone. Then turn up the volume of both your phone and earbuds with the music/video to the maximum.
• What should I do if the volume of the left and right earbuds is inconsistent?
  1. Set the volume balance between the left and right earbud in the soundcore app.
  2. Reset the earbuds as per the following steps: – Place the earbuds in the charging case and leave the case open. – Press and hold the reset button on the charging case for 10 seconds until the LED indicators on the charging case start to scroll and then stay on for 5 seconds. At this time, your earbuds have been successfully reset.
  3. Use a Q-tip with a bit of rubbing alcohol or a small, clean brush to gently clean the metal mesh filter. If possible, please try to use a bulb blower to clean the earbuds – air will be pushed into the port/filter and any dust/dirt inside the earbuds can loosen and extract debris, then use a cotton swab or toothpick to remove them.
  4. Make sure the earbuds are worn at the correct angle.
• How do I improve the sound quality of the earbuds?
  1. Confirm whether your phone has the absolute volume feature disabled.
  2. You can try setting different EQs in the soundcore app or customizing EQ settings.
• How do I improve the 3D surround sound quality of the earbuds?
  Please note that 3D surround sound is not suitable for playing music. Try using the 3D surround sound when watching movies or playing games to enhance the sense of space and three-dimensionality.